■ Machine Introduction
JXJ-46YD series CNC lathe adopts 35° inclined bed design, integral casting, imported P4 grade bearings for the main shaft bearing, which has the advantages of high speed, high precision and low noise. Durable, high processing efficiency. The rear split drainage design can be equipped with a rear chip conveyor or a right chip conveyor to realize unmanned automatic production.
■ Product appearance
■ Machine Parameters
carbed model | JXJ-46YD | |
addscope of work | bedMaximum workpiece rotation diameter | Φ480mm |
mostLarge bar through hole diameter | Φ45mm | |
OKstroke and fastest feed | xAxis Effective Travel | 260mm |
ZAxis Effective Travel | 380mm | |
YAxis Effective Travel | 70mm | |
x,ZAxis rapid traversemove | 20m/min | |
YAxis rapid movement | 15m/min | |
x//ZAxis servo motor | 11.5N.m/ 2.4kw | |
Yshaft motor | 8.4N,m/ 1.7kw | |
Spindle | Spindle nose type | A2-5 |
Spindle through hole diameter | Φ56mm | |
Spindle speed | 5000r/min | |
servo motor | 7.5kw | |
CardDisc and Rotary Cylinder Specifications | 6inch | |
addPrecision | x,ZAxis repeat precisionSpend | ±0.003mm |
x,Zpositioning accuracy | ±0.003mm | |
bedbody structure | overall35° Inclined bed | |
machine structure andmatchSpecificationsgrid | xShaft guide model | 3 0roller |
Yshaft guide | hard rail | |
ZShaft guide model | 3 5roller | |
Dimensions | length x width xhigh | twenty three00*1350*1850mm |
Heavyquantity | 2600kg |
■ Machine configuration
matchfile name | brand/regulationgrid | |
markStandard configuration | CNC system | tower Bay new generationSYNTECtwenty twoTB |
Spindle motor | 75KWTaiwan new generation servo motor | |
drivedevice | 18KWTaiwan new generation three-in-oneone | |
Graduation inspectionMeasurement | towerb. new generation magnetic ring | |
x/YShaft motor (brake, brake) | 24KWTaiwan new generation servo motor | |
ZAxis electricmachine | 2.4KWTaiwan new generation servo motor | |
knifeTower servo motor | 3. 1KWTaiwan new generation servo motor | |
x/Z/Yshaft drive | Taiwan new generation servo drivedevice | |
x/Zaxis rail | Taiwan Intime/Shangyin ( 30/35roller) | |
x/Z/YShaft screw | towerWan Yintai/Shangyin | |
Spindle | A2 -5High Precision Spindle | |
bed frame | overall35° Inclined bed | |
Hydraulic station | countryProduce | |
moveForce Dota | BMT40 | 127 Center heightBMT40YShaft powered turret ( 15Station) |
Cardplate | hydraulic chuck | 6inch, domestic |
Machine Toolpieces | knife block | 0° and90°Two driven tool holders each, 3inner hole tool holder, 3external tool holder |
pull rod 1strip | ||
six Angle wrench and open end wrench 1set | ||
folder head pedal switch 1indivual | ||
electricity source line 1strip | ||
Hydraulic oil |
■ Machine Tool Working Environment
Ambient temperature: within the range of 5°C~40°C, and the 24h average temperature does not exceed 35°C.
Relative humidity: within the range of 30%~95%, and the principle of humidity change is that it should not cause condensation.
Altitude: below 1000m.
Atmosphere: Free from excessive dust, acid gas, corrosive gas and salt.
Installation location: away from vibration sources, away from flammable and explosive items, avoid direct sunlight on the machine tool or heat radiation on the machine tool to cause changes in ambient temperature